Steel cable hangers – crimp type are stud-mounted cable support accessories designed to secure electrical cables, instrumentation wiring, and conduit runs after a weld stud has been installed. The crimp-style design allows cables to be positioned quickly before the hanger is mechanically compressed around the cable, providing dependable retention for overhead, vertical, and bulkhead installations.
Complete Stud Welding supplies crimp-type welding cable hangers in multiple capacities, including single, double, triple-stacked, and four-stacked configurations. Manufactured in mild steel, Type 304 stainless steel, and Type 316 stainless steel, these cable hangers are suitable for commercial, industrial, marine, and shipbuilding applications where welded cable management systems are required.
Cable Hangers – Crimp Type provide a secure and organized method for supporting electrical cables, instrumentation wiring, and conduit systems on welded stud installations. The crimp-style design delivers dependable cable retention without requiring additional fastening hardware.
Available in multiple cable capacities and corrosion-resistant material options, these cable hangers are widely used across industrial, marine, commercial, and shipbuilding applications requiring reliable cable management.
| Catalog No. | Cable Diameter (In.) |
|---|---|
| JCT 1020 | 0.305 – 0.371 |
| JCT 1040 | 0.375 – 0.531 |
| JCT 1051 | 0.531 – 0.680 |
| JCT 1026 | 0.437 – 0.750 |
| JCT 1027 | 0.680 – 0.900 |
| JCT 1030 | 0.750 – 1.000 |
| JCT 1031 | 1.000 – 1.224 |
| Catalog No. | Cable Diameter (In.) |
|---|---|
| JCT 2001 | 0.305 – 0.371 |
| JCT 1052 | 0.375 – 0.531 |
| JCT 1162 | 0.531 – 0.680 |
| JCT 2002 | 0.437 – 0.750 |
| JCT 2003 | 0.680 – 0.900 |
| JCT 2004 | 0.750 – 1.000 |
| JCT 2005 | 1.000 – 1.224 |
| Catalog No. | Cable Diameter (In.) |
|---|---|
| JCT 1170 | 0.531 |
| JCT 1171 | 0.325 – 0.371 |
| Catalog No. | Cable Diameter (In.) |
|---|---|
| JCT 1181 | 0.531 |
| Catalog No. | Cable Diameter (In.) |
|---|---|
| JCT 1041 | 0.500 |
| JCT 1042 | 1.000 |
| JCT 1043 | 0.750 |
| JCT 1044 | 1.224 |
| JCT 1045 | 0.680 |
Designed for stud-mounted installations, crimp-type steel cable hangers provide reliable cable support and organized routing.
Designed for installation onto standard 3/8-inch weld studs, allowing quick attachment after stud welding is completed.
The crimp body is compressed around the cable after positioning, creating a secure mechanical hold without additional hardware.
Available in single, double, triple-stacked, and four-stacked designs to accommodate varying cable quantities while maintaining organized routing.
Catalog options support cable diameters ranging from 0.305 inches to 1.224 inches, allowing selection for numerous industrial cable types.
Manufactured in mild steel as well as 304 and 316 stainless steel for applications requiring improved corrosion resistance and extended service life.
Commonly specified for electrical systems, HVAC installations, shipbuilding, offshore structures, industrial processing facilities, and equipment requiring welded cable support systems.
Pair your weld pins with compatible crimp-type cable hangers to create a dependable cable management solution for your application.