CD Cable Tie Base Weld Studs offer a superior option for securing cable tie bases compared to traditional adhesives or screws. These specialized CTB fasteners use a knock-off style CD retaining stud to mount wire tie bases firmly in place before the top portion of the stud is broken off to accept the cable tie.
Complete Stud Welding provides these high-strength assemblies along with direct application, dimensional, technical, and welding assistance.
CD Cable Tie Base Weld Studs provide a permanent welded mounting solution for nylon cable tie bases used in electrical, industrial, transportation, and equipment manufacturing applications. Unlike adhesive-backed cable mounts, these assemblies remain securely attached even in demanding operating environments.
The knock-off retaining stud securely holds the cable tie base during installation and is removed after welding to create a clean mounting surface for the cable tie. Available in stainless steel and aluminum, these weld studs deliver dependable performance while simplifying cable routing and bundle management.
| Height (C) | Length (L) | Width (D) | Slot Height (A) | Slot Width (W) | Standard B Collet (1-3/8") | Long Collet (2-3/8") | EURO Collet (1.80") |
|---|---|---|---|---|---|---|---|
| 0.39 | 0.875 | 0.625 | 0.09 | 0.325 | CDB-018 | CDBN-018 | CDBS-018 |
Accessory Notes: Standard B Collets require B Stop accessories. Long Collets require long-style stops.
| Property | ASTM Method | Test Condition | Units | Nylon 6/6 |
|---|---|---|---|---|
| Tensile Strength | D368 | +73°F, 50% RH | kpsi | 11.2 |
| Elongation at Break | D368 | +73°F, 50% RH | % | >299 |
| Yield Strength | D368 | +73°F, 50% RH | kpsi | 8.5 |
| Shear Strength | D732 | Dry as Molded | kpsi | 9.6 |
| Deformation Under Load | D621 | 2,000 psi; +122°F, DAM | % | 1.4 |
| IZOD Impact | D256 | +73°F, 50% RH | ft lb/in | 2.1 |
| Tensile Impact Strength | D1822 | +73°F, Long Specimen; DAM | ft lb/in | 240 |
| Melting Point | D789 | Fisher-Johns | °F | 491 |
| Thermal Conductivity | — | DAM Conche-Fitch | BTU-in/hftF | 1.7 |
| Brittleness Temperature | D746 | 50% RH | °F | -85 |
| Oxygen Index | D2683 | DAM | %O | 28 |
| Oxygen Index | D2683 | 50% RH | %O | 31 |
| UL Flammability | UL 94 | DAM | — | V-2 |
| UL Flammability | UL 95 | 50% RH | — | V-2 |
CD Cable Tie Base Weld Studs offer a secure and efficient fastening solution for cable management applications.
The welded cable tie base eliminates the need for adhesive mounting methods, providing a more durable attachment option for wire routing applications.
The retaining stud uses a knock-off style design, allowing the upper portion of the stud to be removed after welding before cable tie installation.
Designed to secure wire bundles up to 1 inch in diameter, these CTB weld studs provide dependable support for electrical and mechanical assemblies.
These cable tie base weld studs are available in stainless steel and aluminum, catering to various applications and fabrication requirements.
The Capacitor Discharge welding process allows the stud base to be attached with controlled weld energy for efficient installation.
The cable tie base provides pull-off strength exceeding that of a typical 3/16 nylon wire tie for improved fastening reliability.
Need help with dimensions, materials, stock, or welding? Our Complete Stud Welding team will help you configure the right weld stud for your application and production requirements.