No Thread J Bolt Weld Studs are designed for welded attachment points where a formed hook provides a secure connection after installation. Manufactured for the ARC stud welding process, these weld studs are commonly specified for lifting applications, equipment assembly, and fabricated components requiring a permanent J-shaped anchor.
Complete Stud Welding supplies No Thread J Bolt Weld Studs in both mild steel and stainless steel. Installation requires special chuck assemblies, while a dual-leg ferrule foot plate is the preferred setup for proper alignment during welding.
| Stud Specifications | Standard Accessories | |||||||
|---|---|---|---|---|---|---|---|---|
| Base Diameter (D) |
Minimum Length (L) |
Minimum Bend Length (E) |
Minimum Inside Diameter (ID) |
Minimum End Length (G) |
Ferrule P/N |
Foot P/N |
Grip P/N |
Chuck P/N |
| 0.188 | 1.125 | 1 | 0.5 | 0.5 | F019-F | QN-018 | n/a | JB-018 |
| 0.25 | 1.25 | 1.125 | 0.625 | 0.5 | F025-F | QN-025 | n/a | JB-025 |
| 0.312 | 1.5 | 1.25 | 0.75 | 0.5 | F031-F | QN-031 | n/a | JB-031 |
| 0.375 | 1.625 | 1.375 | 0.875 | 0.5 | F037-F | QN-037 | n/a | JB-037 |
| 0.438 | 1.75 | 1.5 | 1 | 0.5 | F043-F | QN-043 | n/a | JB-043 |
| 0.5 | 2 | 1.5 | 1 | 0.5 | F050-F | QN-050 | n/a | JB-050 |
| 0.625 | 2.5 | 1.875 | 1.5 | 0.5 | F050-F | QN-050 | n/a | JB-062 |
To order or specify give: Stud Code, D x L; BL; ID; G
Example: NTE, 3/8 x 2.75, 1.125, (BW), 0.875, 0.375, mild steel, 2000 pcs.
Specify (L) Length on a Before Weld basis by indicating “BW”
or on an After Weld basis by indicating “AW.”
No Thread J Bolt Weld Studs are designed for welded attachment points where a formed hook provides a secure connection after installation. Manufactured for the ARC stud welding process, these weld studs are commonly specified for lifting applications, equipment assembly, and fabricated components requiring a permanent J-shaped anchor.
Complete Stud Welding supplies No Thread J Bolt Weld Studs in both mild steel and stainless steel. Installation requires special chuck assemblies, while a dual-leg ferrule foot plate is the preferred setup for proper alignment during welding.
The unique hook geometry and threadless design deliver extreme mechanical holding capacity, transforming how overhead assemblies and hanging pathways are secured.
The open crook provides exact clearance boundaries (0.500" to 1.500" ID). This precise bend keeps slung hardware or cabling configurations seated securely.
Eliminating external threading removes localized fracture points under stress. The unmarred surface ensures uniform shear distribution during intense dynamic load shifts.
Drawn arc execution yields localized, full-penetration atomic bonding. This single-point attachment outclasses bolted-on brackets by removing systemic looseness or back-out issues.
Every diameter aligns with a specific arc ferrule to capture expanding liquid steel. It shapes an optimized base fillet for rigid structural stabilization.
These components mandate JB-series chuck blocks alongside dual-leg foot setups. This specialized pairing guarantees a true perpendicular axis during rapid production cycles.
No Thread J-Bolt Weld Studs require dedicated J-bolt chuck assemblies during installation. A dual-leg ferrule foot plate is recommended to maintain proper positioning throughout the ARC stud welding process.
Choosing the right diameter, bend dimensions, material, and accessories helps ensure proper installation and dependable performance. Complete Stud Welding can assist with specifications, product selection, and ordering support.